Linksys LAPAC1200 Firmware Download. To date, I have 5x Linksys WRT54GL in my entire apartment building in operation. These have been running for several years and have never caused problems. Since I would not want to do without POE and the new WLAN Standarts, a new Access point had to come. For those who want to run a Linksys WRT45GL with POU, a POE splitter would be the right device. I have already tested the following: "Digital Data POS-1002 POE Splitter 5V -12V". Here, all connections are included to power the WRT54GL from the network. And as always, a matter of taste. When I first saw the Access point, I was surprised by the size.
Linksys LAPAC1200 Router Firmware Download
I had expected rather with a smoke detector similar device. To compare it is rather with a plate. I installed the access point on the wall. The wall mount for this is optimal for this purpose. The network cable is a bit fiddly, but everything is quite feasible. I know a little with network technology, hence the startup was pretty easy for me. CD and instructions I have not needed for this. First I connected the device with my computer and the external plug-in power supply. The fixed IP address of the access point is indicated on the sticker on the device or alternatively in the instructions.
Linksys LAPAC1200 Firmware Upgrade
Download Router Firmware Linksys LAPAC1200
This is entered via the browser and the computer should be on the same network, and relatively quickly you can see a nice web interface. The standard access data can also be found in the manual. All important settings can be found quickly and intuitively. The web interface is German, well translated and explained by itself. I have as usual my guest WLAN over a virtual network (VLAN) furnished. This went quite quickly and without further problems. SSIDs can be created for both the 5 Ghz and 2.4 GHz WLAN area. Both frequencies can be operated simultaneously with the access point.
Download Firmware Router Linksys LAPAC1200
The range with 2.4 Ghz is incredible. This access point replaces 2x Linksys WRT54GL. My house consists mostly of solid concrete walls. In a range of 100M2 the reception is perfect. The range of 5 Ghz is the madness. Since 5 GHz can be operated with more transmission power, of course, the reception is also significantly still there. Even with my neighbors, 50 meters further I have in the 5 Ghz still acceptable reception. If you do not mind the size, and a reliable access point searches, which is the correct device. The device is worth its price in any case. Profigators, to which I count this Access point cost as a rule 500 euros!