Download Firmware SJCAM SJ5000
SJCAM SJ5000 Firmware Download. The SJCAM SJ5000 Wifi is a great actioncam. The SJCam SJ5000 is now a popular GoPro alternative. Not least because of the much cheaper price. This ActionCam provides the beginners in the video segment quite useful images. Although these do not achieve the quality such as a GoPro 4, but you can hardly wait for a third of the price. Nevertheless, the very light action camera for very little money offers very good results. It shines by good quality a lot of accessories and of course their low price. The price-performance ratio is simply unbeatable. It does not need to hide from the original GoPro, and is a good GoPro alternative!
SJCAM SJ5000 Firmware Update Download
The handling is initially getting used to but after a few tries, the menu can be controlled quite properly. If you do not need videos in 4K, this actioncam is highly recommended. The battery life could be a little better but replacement batteries are cheap, since the change is no problem. We recommend anyway, to the additional battery to buy another, then charging on the go is no longer an issue. The model is available in 3 versions. The basic version for plenty of 100 EUR does not offer Wifi. The SJ5000 WiFi has a larger screen (2 inches instead of the 1.5 inch with the SJ5000 WifiPlus), a slightly lower photo resolution (14 MP instead of 16 MP) and in FullHD a maximum refresh rate of 30 fps. The SJ5000 Plus, however, creates 60 frames/s.
SJCAM SJ5000 Review & Firmware Download
Download Action Cam Firmware SJCAM SJ5000
The price of the SJ5000 WiFi is about halfway between the SJ4000 and the SJ5000 Plus at around 125 EUR. The video area offers FullHD (1920x1080p) at 60 or 30 fps, HD (1280x720p) at 120, 60 or 30 fps, and WVGA (848x480p) at 240, 120, 60 or 30 fps. For a camera in this price range overall a very good selection. Ma should mention here, however, that the refresh rates in PAL are slightly lower than those in NTSC. The video quality (Super Fine, Fine or Normal) can also be selected. Other features include zooming (digital), rotating the image 180 degrees or even leveling the microphone. If you care about the sound that uses this option: From 80% the microphone overdrives too fast, with 50-70% you are on the safe side.
Download Firmware Action Cam SJCAM SJ5000
There is also a car camera mode. The SJ5000 Plus is simply connected to your car via a cigarette lighter, and the camera turns on at startup. as soon as she gets power). Then the camera begins to film independently. If the ignition is switched off, the action camera saves the recording and switches off. The photos can be shot in resolutions of 16, 14, 12, 8, 5, 3, 2 or 1.2 megapixels and WVGA (640x480p). The camera features a shutter-release shutter release button (3, 5, 10, 30, 60 seconds), a self-timer (one picture every 3, 5, 10, 30, or 60 seconds), and continuous shooting at up to 20 frames per second. In fact, the SJ5000 Plus does not live up to its promise in this feature, but takes 2 seconds to capture 20 images. All this is by no means a matter of course for an actioncam in the price range of under 200 EUR.
Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE.
To upgrade the firmware properly, follow the steps carefully:
1. Power the camera off.
2. Remove the battery and the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format* on your computer.
4. Copy the firmware files into the root directory of your MicroSD card.
5. Reinsert the SD card to your camera.
6. Reinsert the battery.
7. Connect the camera with charger, the camera will be upgraded automatically
8. After the firmware update is completed remove the SD card from the camera and format it again on your computer, make sure to use the FAT32 file format*.
We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.