Download Firmware SJCAM SJ6 Legend
SJCAM SJ6 Legend Firmware Download. The SJCAM SJ6 Legend is traded as a direct successor to the SJ5000 Plus and has two major innovations. One of the innovations is that the SJ6 Legend will be equipped with two displays. On the back is the 2-inch main display, which resolves with 240 × 320 pixels. This is the live image output, shot shots can be viewed on the display, as well as camera settings can be made. It is essential that this display now also has a touch screenintegrated, making the camera even easier to use. On the front side there is also a small LCD display, which shows the camera status (recording time, battery level, recording mode).
SJCAM SJ6 Legend Firmware Update Download
Another innovation is the image processor, which is now a Novatek 96660. This allows video recording with a maximum resolution of 4K at 24 frames-per-second. However, this 4K resolution is only interpolated and is not achieved natively. Of course, smaller resolutions are also possible, such as 1080p at a maximum of 60 frames-per-second or 720p at a maximum of 120 frames-per-second. The image sensor used is still the Panasonic MN34120PA sensor. This resolves with a maximum of 16 megapixels and has already been used in the SJCAM SJ5000 Plus. Videos are saved in MP4 and MOV format.
SJCAM SJ6 Legend Review & Firmware Download
Download Action Cam Firmware SJCAM SJ6 Legend
Other noteworthy features of the SJCAM SJ6 Legend include a WiFi module which also allows the Action Cam to be connected to an app, electronic image stabilization and an integrated tripod socket. With the SJCAM app, the Action Cam can be operated via a smartphone/tablet. It can make settings, you can access the shot recordings and share them even in social media. The image stabilization is digital and sufficient to stabilize a hands-free FHD recording. Note, however, that an "EIS" can not replace a gimbal! Also, the battery of the new SJCAM has been increased by 100mAh and now has a capacity of 1000mAh. Whether or not the size of the previous 900mAh batteries has changed, or whether they can continue to be used, is currently unknown.
Download Firmware Action Cam SJCAM SJ6 Legend
It features a Panasonic MN34120PA 16MP image sensor and a 7-layer lens with F / 2.5 aperture and 166° viewing angle. Offers 4K quality recording. The built-in 2-inch display supports gestures to switch between the most important functions offered by the camera, and an additional 0.96 "front panel display to control the camera's current operating mode and status, and to achieve spectacular self-performance including a car registrar mode, FPV recording mode, video/photo-lapse, video+photo, etc. The SJCAM SJ6 Legend has a built-in speaker and microphone, and connects to other devices wirelessly with Wi-Fi and Bluetooth.
DOWNLOAD SJCAM SJ6 Legend FIRMWARE:
Note: Before install visit this link first: Steps to install firmware SJCAM SJ6 Legend
*If link above does not work, otherwise you can visit HERE to download the firmware.