SJCAM M10 Firmware Download

SJCAM M10 Firmware Download

SJCAM M10 Drivers Download. The comes of the M10 + with 2K video recordings and a gyro image stabilizer. Dominates an Action Cam 2K video recordings, then you can actually synonymous with it Full HD with 60fps and 720p120 record.

For this Cam, one decides on the basis of the form. Either you find them visually beautiful or it just fits better to the desired application. In addition, I like the arrangement of the buttons and the battery compartment, which can be opened better than all other models from SJCAM.

SJCAM M10 Firmware Update

SJCAM M10 Firmware

In addition to the possibility to record in 2K, a gyro sensor was added for image stabilization. Can it also do what it promises or is it just a marketing gimmick? Yes it works! And pretty good, too. In the contribution to the HSP Planet, I used the SJCAM M10 + to take pictures while driving and to try out image stabilization.

Download SJCAM M10 Firmware
Note: Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE

To upgrade the firmware properly, follow the steps carefully:

1. Power the camera off.
2. Remove the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware 'bin' file into the root directory of your MicroSD card, please keep the firmware 'bin' file's name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the 'bin' file.

*We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

SJCAM M20 Firmware Download

SJCAM M20 Firmware Download

SJCAM M20 Drivers Download. At 1080p resolution with 60fps I lower the sharpness expected due to the sensor used. Several cameras with Sony IMX206 passed through my hands and there was worse. However, it will be seen that it will not be as much a sensor as the lens and the video is more sharp than most competitors with the same hardware.

Even so, I can imagine more sharpness of detail and you can also notice the noise in the video. All of this should be caused by firmware on the camera and fixed with some further updates.

The SJCAM M20 has a slightly worse dynamic range in the video than the SJ5000X Elite, mainly sunlight, but can not be objected to within the camera's price, in this case I recommend playing with camera settings (white balance and exposure). What is important for the action camera is to master the fast movement, but SJCAM cameras have never been a problem (mainly because of the Novatek processor, which belongs to that point of view) and the problem is not even with the M20. The 1080p video stream with 60fps is 30Mbps.

SJCAM M20 Firmware Update

SJCAM M20 Firmware Update

Camera uploads videos to either mov or mp4 format, depending on what you choose in the camera menu. Our test videos were downloaded in mp4 and you can download them without lowering the quality of YouTube: 1080p_60fps, 2K_30fps, 4K_24fps The SJCAM M20 action camera is in the Czech official distribution of 3990Kč (for more information  here ) and you are buying a very decent camera with stabilization using gyroscope, 2K video and 1080p resolution with 60fps. In addition, the remote control shifts the camera in a different direction and makes it easy to work with the camera.

It again fades the poor quality of the recorded sound, as well as some errors in the current firmware version (1.2.4). Fortunately, at least firmware can be repaired and SJCAM has grown accustomed to the fact that it really takes care of its cameras in this case.

Download SJCAM M20 Firmware
Note: Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE:

To upgrade the firmware properly, follow the steps carefully:

1. Power off the camera.
2. Remove the MicroSD card from the camera.
3. Format the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware 'bin' file into the memory card, please keep the firmware 'bin' file's name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the 'bin' file.

-We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

DOWNLOAD FIRMWARE:
SJCAM SJ4000 Firmware Download

SJCAM SJ4000 Firmware Download

SJCAM SJ4000 Drivers Download. As on all action waterproof cams, you will first take it out of the box. A simple press on the black clip of the top and everything unlocks. The joints are of quality and inspire confidence. Once the camera is out, we insert the battery (about 80min of autonomy) and it remains only to charge. An electrical outlet, the USB cable and go for a good hour before reaching 100%. A light on the screen indicates the progress of the load. All you need is a micro SD card and we recommend you not skimp on the quality at this level. For example the SanDisk 8Go in Class 10 is the best.

On an 8GB card you can put 60min of video in 1080p and as it will charge the battery every hour I advise you to multiply the cards in 8GB rather than a single big 16 or 32GB. For security, we will format using the SJ4000 . The opportunity to approach menus and navigation via the touch screen.

LCD screen
The menus and settings of the SJ4000 are very intuitive and well localized in French. The touch LCD responds well even with big fingers and logic menus seem even more intuitive than at GoPro . Even if the screen is low definition, it will allow you to frame your plans even in direct sunlight. Playing recorded videos provides comfort and security to check your shots. All the classic shooting modes are available: video, photo and timelapse but you also have a fairly new mode that allows you to use the SJ4000 as a  dashcam.

SJCAM SJ4000 Firmware Update

SJCAM SJ4000 Firmware Download

Action Cam Firmware SJCAM SJ4000 Download
Dashcam mode  is the ability to shoot continuously, especially for the car, with information (date and time) printed on the video. Still little used in Europe, this mode is very popular in Russia and China to serve as video evidence of his conduct in case of accident.

In this mode the camera connected to a cigarette lighter will start at the same time as the car and will film continuously. If the capacity of the card reaches saturation, no worries loop rewritten on the oldest files and so on.

Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE.

To upgrade the firmware properly, follow the steps carefully:

1. Power the camera off.
2. Remove the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format on your computer*.
4. Copy the firmware 'bin' file into the root directory of your MicroSD card, please keep the firmware 'bin' file's name.
5. Reinsert the SD card to your camera.
6. Connect the camera with charger, the camera will be upgraded automatically. If your battery was full, you do not need to connect the camera with charger.
7. After the firmware update was completed, please delete the 'bin' file.

*We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

DOWNLOAD SJCAM SJ4000 FIRMWARE:
SJCAM SJ5000 Firmware Download

SJCAM SJ5000 Firmware Download

SJCAM SJ5000 Drivers Download. The manufacturer SJCam is known for its action cams, although the models of the industry leader GoPro look very similar, but are much less to have. So does the SJ5000, which offers full HD resolution, a 2-inch display and numerous accessories. The SJ 5000 comes in typical action-cam design, as a small box with lens. The scope of delivery includes a protective housing, with which the camera can descend up to 30 meters. Numerous mounting options are also included in the accessories. SJCam SJ5000Videos are recorded in full HD at 30 frames per second. In HD, so with 1280 x 720 pixels and 60 frames per second are possible.

The camera captures photos with up to 14 megapixels thanks to a Panasonic CMOS sensor. For image control, a 2-inch display helps. It also displays settings and settings menus. It is operated via five buttons on the housing, which can also be used when the camera is in its protective housing. With the WiFi version, a smartphone can also be used as a remote control.

SJCAM SJ5000 Firmware Update

SJCAM SJ5000 Firmware Download

Action Cam Firmware SJCAM SJ5000 Download
Known by many names! The action cams of SJCam are also distributed under other brand names. Especially known in Germany are Qumox and Ultrasport. The model designations usually remain the same, as do the technical features and functions of the devices. The SJ series has already made a name in the segment of action cams under various brand names. Because the models are affordable and usually offer a pretty good picture quality. This is also praised by users with the SJ-5000, although they can not quite keep up with the models of the GoPro series. It is already available for about 125 EUR on Amazon , in the Wifi version from about 135 EUR.

Before the firmware update, please make sure to use a high quality class 10 memory card, a list of supported cards can be found HERE.

To upgrade the firmware properly, follow the steps carefully: 
1. Power the camera off.
2. Remove the battery and the MicroSD card from the camera.
3. Reformat the MicroSD card using the FAT32 file format* on your computer.
4. Copy the firmware files into the root directory of your MicroSD card.
5. Reinsert the SD card to your camera.
6. Reinsert the battery.
7. Connect the camera with charger, the camera will be upgraded automatically
8. After the firmware update is completed remove the SD card from the camera and format it again on your computer, make sure to use the FAT32 file format*.

We recommend to do the format under Windows or MAC, some Linux users are getting problems updating because the format is not correct.

DOWNLOAD SJCAM SJ5000 FIRMWARE:
SJCAM SJ6 Legend Firmware Download

SJCAM SJ6 Legend Firmware Download

SJCAM SJ6 Legend Drivers Download. The battery in which the camera is equipped has a capacity of 1000 mAh. According to the producer, it should be enough for about 110 minutes of recording. I have tested the length of action several times and the average (depending on activity and temperature) was 93 minutes. The lowest result (on frost below -5 degrees Celsius) is 87 minutes. It must be said that the data given by the manufacturer can be considered as factual (certainly tested in laboratory conditions, hence small deviations from my measurements). The supply voltage is 5V 1A. Unfortunately, the device is charging for a relatively long time (about three hours) which may have some significance for some people. However, you can buy additional batteries on the distributor website that will allow you to record continuously for a much longer time. SJ6 Legend can be loaded with a network charger, car charger or via a computer.

The camera supports cards up to 64 GB (class 1 or more) as well as selected 128 GB cards. The recording formats are:


  1. Photo: JPEG
  2. Audio: AAC
  3. Video: H.264


An interesting and very valuable feature is the aforementioned stabilizer that really works. When cycling quietly, you can clearly see the difference after launching it and the films gain even more.

SJCAM SJ6 Legend Firmware Download

SJCAM SJ6 Legend Firmware Download

Action Cam Firmware SJCAM SJ6 Legend Download
The camera has a dedicated application SJCAM APP. Unfortunately, the app is resource-consuming so it is worth having a smartphone with good parameters (my Xiaomi Redmi Note 4 gives advice). The application allows you to control the device via Wi-Fi (which is another useful feature of the SJ6 Legend). But... you can also buy an additional external microphone or remote control - it's also a plus of the device.

Who is the camera for? For each active person. It will be used by runners or mountain runners, cyclists, sailors, snowboarders, skiers and people who love motocross. You can also record family events (my 3,5 year old likes to record movies with her). Due to the small footprint, you can take it with you, without any remorse, to enjoy the possibility of recording good quality movies.

In terms of price and quality SJCAM SJ6 Legend currently is probably second to none, it's good equipment, at a very good price and in addition with many practical additions. It is worth investing in it looking for a budget webcam with a lot of possibilities.

DOWNLOAD SJCAM SJ6 Legend FIRMWARE:

SJCAM SJ7 Star Firmware Download

SJCAM SJ7 Star Firmware Download

SJCAM SJ7 Star Drivers Download. Video quality of the SJCAM SJ7 Star. On the hardware side, the SJCAM SJ7 Star is well positioned, even if it can not keep up with the current market leaders of Sony, GoPro or YI Technology. The combination of Ambarella A12S75 image processor and Sony IMX117 image sensor allows the Action Cam to shoot natively in 4K at 30 frames-per-second. The recording format is MP4, encoded in H.264.

The video quality is hardly different from the ThiEYE T5e, which was tested just a few months ago. Video recordings convince with a pleasant sharpness, a high degree of detail and a natural color reproduction. Not convincing, however, the sound recording quality. Recorded in mono with a 128 kBit / s bitrate and a sampling rate of 48 kHz. Even without a waterproof case, the sound picked up by the action cam microphone is hard to use. The sound is clearly captured too quietly and is hardly understandable by the strong noise. Take the sound over that again SJCAM lavalier microphone gives you one of the best sound recording qualities an action cam has to offer.

SJCAM SJ7 Star Drivers Download

SJCAM SJ7 Star Firmware Download

Action Cam Firmware SJCAM SJ7 Star Download
An additional feature of the SJ7 Star is electronic image stabilization (EIS). However, this is only available up to a resolution of 1080p at 60 frames-per-second to choose from. The image stabilization provides acceptable results.

Photo quality of the SJCAM SJ7 Star
The maximum resolution for photos is interpolated 16 megapixels. Natively, the maximum resolution of the image sensor is 12 megapixels. The photo quality, like the video quality, convinces with a high degree of detail and a good color rendering. Despite the many setting options for exposure, the white balance or the ISO, the photo mode lacks the ability to digitally correct the lens curvature.

Battery pack
The capacity of the battery is 1000 mAh . The battery life measured in the test, with a resolution of 4K, was 60 minutes. Enabling additional WiFi, the runtime is reduced to about 45 minutes. The recording time at 1080p is about 75 minutes. The charging time is heavily dependent on the charger. Charging the battery directly on the action cam, the charging time is just under 3 hours. With the help of a special battery charger, the charging time can be reduced to about 1 ½ hours.

DOWNLOAD SJCAM SJ7 Star FIRMWARE:
Garmin Virb Ultra 30 Firmware Download

Garmin Virb Ultra 30 Firmware Download

Garmin Virb Ultra 30 Drivers Download. Clearly, Garmin relies on its tracking capabilities, which gives the product cascade a new perspective. Garmin has become a serious challenger to GoPro. Above all, the ability to collect data through G-Metrix and incorporate them into the movies is a cool feature. The battery can quickly quit power. The transfer to computer is done with an old mini USB cable, it is surprising that Garmin has not switched to micro USB or USB-C.

With the VIRB Ultra 30, Garmin has radically changed its design to its old top model, VIRB XE, and comes closer to GoPro's cameras. In terms of size, however, the difference is great because the VIRB Ultra 30 is both smaller and lighter. Unfortunately, it will change when you plug the camera into the enclosed housing, which is both needed to make it waterproof and to mount it somewhere. As with the other cameras in the test, the biggest news is the ability to shoot video in 4K at 30 fps. You can record at 24 fps as well, but it is the smallest team in our opinion. The 4K recordings are incredibly good, especially if you shoot in bright light, you get both crisp and colorful images.

Garmin Virb Ultra 30 Firmware Download

Garmin Virb Ultra 30 Firmware Download

Action Cam Firmware Garmin Virb Ultra 30 Download
Another new feature of the VIRB 30 is voice recognition, which allows you to control the camera with simple voice commands. It works quite well, though you feel a little stupid when you walk around and talk with your camera in the middle of town. At the top of the piste, hardly anyone notice. The camera, of course, has built-in image stabilizer that smooths shaky recordings. Like GoPro, this is done digitally, which is a bit of a shame. True, in fairness, it should be added that it is quite effective and that the videos are getting seamless.

Easy Navigation
screen on the back is of course touch sensitive and easy to find in the menus. But the screen could have been a bit bigger. You enter the menus by swiping from the four edges. From the bottom you have the main menu, from the top you get wifi, bluetooth and sensors, from left video and camera settings and from right pro settings if you have enabled them. It is worth noting that you can also use the touch screen when the camera is in the house, which has previously been a problem for some competitors.

DOWNLOAD Garmin Virb Ultra 30 FIRMWARE:
Nikon KeyMission 360 Firmware Download

Nikon KeyMission 360 Firmware Download

Nikon KeyMission 360 Drivers Download. For most of the test, the camera works really well. Above all, it's easy to start the camera completely remotely via the app in the mobile phone. From here, I can wake the camera from hibernation and get a live view of what the camera sees, start and stop video recording, and take still pictures and refuel them to the phone. Just that it works smoothly, however, is not something I notice at the start of the test, because then everything seems wrong to do just that. It takes lots of failed attempts before I get in touch with camera and app. Video recordings are terminated after just a few seconds. The transfer of images and movies from the camera goes untidily slowly, and when I upload the images on sites like Google Photos and Flickr, they do not know that there are panoramic images.

All these errors are resolved when I successfully update the system software in the camera. Just when I get so much trouble with the camera it becomes clear that the hardware design is not optimal. The time that the connection to the mobile phone does not work shows how dependent it is. When the camera is experiencing problems, getting updated software or being taken without a mobile it becomes very difficult to know what it is trying to tell you. Without the mobile phone available, start the camera by pressing the camera or video button. No start button, so when you get started, the camera takes a picture directly, whether you want it or not. The camera thus has only two buttons and offers no other possibilities for direct control. What I especially miss is a small display so that you can get an indication of what the camera is doing. When I update the software, the camera signals a variety of flashes: The color of the lights, any flashes and the pace of them determine what the signal means and there are ten different meanings. In short, it is impossible to speak without consulting the instructions every time. Fortunately, these flashes usually fail to signal errors after updating to the more stable software, but the need for better control and information from the camera, even without mobile connection, remains.

Nikon KeyMission 360 Firmware Download

Nikon KeyMission 360 Firmware Download

Software Nikon KeyMission 360 Download
The app I think Nikon could do better. Especially because the cell phone is so central when we use the camera, the shortcomings in the app are clear. It is noticeable that Nikon has limited experience here, unlike for example LG and Samsung, which both loosened the mobile connection more smoothly. We do not get any live image in the app when we shoot and most of all the finished movies are sometimes a bit strange to transfer to the mobile, although obviously an emergency solution is to pick out the memory card from the camera and take the pictures directly from there.

Nikon delivers among the best picture quality of a 360 camera without having to impress because the shortcomings are noticeable. On the other hand, the job 360 is worth doing a lot because the option is to take a lot of individual photos and sew together into a sphere. In this case, you can live with poor image quality and a half-time mobile app.

Nikon keymission 360:




  • Dimensions: 65.7 x 60.6 x 61.1 mm 
  • Weight: 198 grams (Classic model: 59 grams) 
  • For: App for Android and Ios 
  • Camera: 30 megapixel, 1.6mm focal length, f / 2, ISO 100-1600, movies up to 4K 
  • Storage: Micro SD card 
  • slot Other: Stable and water resistant to IPX8 standard, can be used 30 meters below the surface for up to 60 minutes. 

Nikon KeyMission 360 FIRMWARE:

Kodak Pixpro SP360 4K Firmware Download

Kodak Pixpro SP360 4K Firmware Download

Kodak Pixpro SP360 4K Drivers Download. The PixPro SP360 4K works without a smartphone. The operation via app is but at the latest necessary if we want to change recording parameters. The free app is available for Android and iOS. Unlike all other tested competitors, it is also possible to control the camera with the computer. A version for both Windows and macOS computers is available for download from Kodak. The program also allows saving videos from different angles or using the PixPro SP360 4K as a webcam. In addition to the smartphone app, there is also software for PC or MAC. In the app and the software, the user also has the ability to change various recording parameters or watch the finished videos.

For the processing of two single recordings to a video, there is again a separate software from Kodak. The combination of the two shots, however, is somewhat problematic. Although there is a special mount for shooting with two cameras, the interfaces of the two videos often do not fit together perfectly. The result is indeed a true all-round recording; The edges of the two shots are still clearly visible. Especially with vibrations and movements, this effect is clearly visible. For steady and quiet shots, the combination works really well. What we missed in the app, is a direct playback option for VR glasses.

Kodak Pixpro SP360 4K Firmware Upgrade

Kodak Pixpro SP360 4K Firmware Download

Action Cam Firmware Kodak Pixpro SP360 4K Software
Although we can look around in the video, a stereo image representation is not possible. The video quality of the Kodak is second to none. Although there are now other 360-degree cameras with 4K resolution, the result of the Magicsee P3 360 (review), for example, but looks by far not as good as that of the PixPro SP360 4K. The colors look gorgeous and the videos are still sufficiently sharp when viewed on a large monitor. Even in low light conditions, the videos are still very good. Image noise does occur, but the quality is far better than the other tested all-round cameras. The joining of two videos by software does not always work perfectly. Only the pictures with two cameras are not really convincing. We hope that Kodak will once again improve the stitching software for merging the frames.

DOWNLOAD Kodak Pixpro SP360 FIRMWARE:
QUMOX SJ4000 Firmware Download

QUMOX SJ4000 Firmware Download

QUMOX SJ4000 Drivers Download. If you look for negative online reviews on this little gem, it's hard to find. It will be because they managed to concentrate in an object that costs just under € 70 all that is necessary to have fun. The video quality is definitely good. Record in FullHD, even if only 30fps, on Micro SDHC cards, has excellent stabilization and is very responsive to exposure settings, even in the transition from shaded areas to areas full of light. Obviously, like the older sisters, she "scatters" when little light is present. The audio part is incredibly clean: no ticking or background noise, excellent for use as a car camera. The control display is definitely comfortable. Even if it does not have a remote control or WiFI, it is easy to understand, given the price, it has a complete menu that allows, even if in a rather difficult way, to access all the various system voices.

QUMOX SJ4000 Firmware Upgrade

QUMOX SJ4000 Firmware Download

Action Cam Firmware QUMOX SJ4000 Download
The battery lasts about an hour and you can buy a second one for less than 10 €. I came across the camera while searching for the release date of the new GoPro HERO4. Actually, I wanted to buy the GoPro HERO3 + Silver if, according to my hope, it would have been cheaper with the new GoPro HERO4. But after seeing various comparisons between the SJ4000 and the GoPro Hero3 (+) camera, I was convinced of the quality of the images and the price of the SJ4000 camera.QUMOX SJ4000 Full HD Action Camera 1. The QUMOX SJ4000 has a 12 megapixel chip and can record in FullHD on MicroSD card. The menu is very extensive and offers many functions such. Motion detection (motion detection) and time-lapse photography. The accessories are impressive. There are various mounting materials for mounting on the helmet, bicycle and other recreational sports equipment.

Download Drivers Action Cam QUMOX SJ4000
The picture shows the camera in the outdoor or underwater housing and a foot with the counterpart z. B. can be attached to the helmet.QUMOX SJ4000 Full HD Action Camera 2Through a small conversion (had to disassemble the quadcopter anyway for repair) I have also made room for a bracket and there mounted the camera. Until I have a protective lens, the camera remains in the protective housing.QUMOX SJ4000 Full HD Action Camera on Quadrocopter On the subject versions: Since the firmware (N20140809V01) is quite up to date with my model and the camera offers a TV mode (interesting for first person view with the quadrocopter) in the menu, I have, according to information in the network despite the V01 in the firmware that new LCD or PCB. Attention: There is now a fake of the clone! Sounds weird is like that. 🙂Look closely where I buy your camera. I have mine from Amazon and I am pretty sure that mine is not a fake.

DOWNLOAD QUMOX SJ4000 FIRMWARE: